{"product_id":"varusteleka-assaulter-back-panel","title":"Varusteleka Assaulter Back Panel","description":"\u003cp\u003eDo you carry your breaching tools, smoke and frag grenades, and extra magazines at the bottom of a jingling satchel or with some DIY zip-tie setup on the back of your plate carrier? Get with the times and acquire our modular Assaulter Back Panel that solves all your assaulting problems!\u003c\/p\u003e\n\u003cp\u003eBy securing mission critical items in the back panel, you keep them organized and with you even during rougher insertions, such as riding a snowmobile or boat, or rappelling from a helicopter. After the insertion, your battle buddy opens the back panel pocket, and the contents inside are easily accessible to him as you e.g. move around buildings or indoors in stack formation.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eAs the name suggests – this is meant to attach to the PALS webbing on the back of a plate carrier and carry all sorts of gear that might be needed, especially when assaulting urban areas. The back panel is also suitable for slower-moving operations, where backpacks are left in vehicles\/caches, and you just carry your optics, communication devices with batteries, water, food, and perhaps a thermal jacket.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTakes up 4 columns and 6-7 rows on PALS webbing\n\u003cul\u003e\n\u003cli\u003eTypically, there are 2 columns left free on the PC's back\u003c\/li\u003e\n\u003cli\u003eThe back panel can be installed to one side, leaving space for a larger breaching tool holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eThree separate sections:\n\u003cul\u003e\n\u003cli\u003eOuter pouch\u003c\/li\u003e\n\u003cli\u003eMain pouch\u003c\/li\u003e\n\u003cli\u003eFlat pouch for breaching tool\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eThe Assaulter Back Panel is packed with modularity and features\u003c\/b\u003e – let's go through them in detail.\u003c\/p\u003e\n\u003ch3\u003eOuter Pouch\u003c\/h3\u003e\n\u003cp\u003eBesides carrying equipment with the zipper closed, the flap of the outer pouch can be opened, rolled up and secured out of the way with the hook and loop on the inside bottom of the pouch. This way, items stored in the pouch are easily accessible to your fellow fighter.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions approx. 25 x 18 x 6 cm \/ 10\" x 7\" x 2.3\", fitting, for example:\n\u003cul\u003e\n\u003cli\u003e4-6 hand grenades \/ smokes (depending on the shape)\u003c\/li\u003e\n\u003cli\u003eor 7 AR magazines (30 rnds)\u003c\/li\u003e\n\u003cli\u003eor 6 AK magazines (30 rnds)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe inside back of the pouch is hook and loop PALS panel\n\u003cul\u003e\n\u003cli\u003eCan attach both hook and loop inserts and MOLLE pouches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMain pouch\u003c\/h3\u003e\n\u003cp\u003eThe main pouch is larger, and the zippers open from the top down to about halfway. The resulting flap can be folded down into the pouch. The unique feature of the main pouch is that it continues from the bottom as a roll-up tube. It comes with a divider containing a stiffener, which attaches inside the main pouch with hook and loop if you want to use the main pocket and the roll-up part as separate compartments.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions approx. 35 x 18 x 10 cm \/ 14\" x 7\" x 4\" with the roll-up part rolled up\u003c\/li\u003e\n\u003cli\u003eThe inside back of the pouch is hook and loop PALS panel\u003c\/li\u003e\n\u003cli\u003eOne-wrap loop for a hydration bladder\u003c\/li\u003e\n\u003cli\u003eSlits on the sides for a hydration tube or radio antenna\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eThe roll-up extension\u003c\/b\u003e aims to increase the volume of the back panel. Additionally, the tube is another way to access items packed into the main pouch. The tube is designed to fit a Scott Promask FM3 gas mask. Instead of a gas mask, it can also hold additional clothing or medical equipment.\u003c\/p\u003e\n\u003cp\u003eEven if your shoulder mobility is limited, the user can reach to open and close the roll closure. Note that when you open the rolled tube straight, loose small items will likely fall out. Also, the main pocket will jettison loose items if the divider is not in place. So, if you plan to use the tube by opening it, it's not advisable to store a large collection of separate small items in it.\u003c\/p\u003e\n\u003ch3\u003e\"Bolt Cutter\" Pouch\u003c\/h3\u003e\n\u003cp\u003eBehind the main pouch, there is an additional 15 cm \/ 6\" wide flat pouch for a long breaching tool, such as bolt cutters. This pouch \u003cb\u003eis not\u003c\/b\u003e connected to the main pocket's roll-up extension. The pouch is indeed very flat, so a full-size sledgehammer head won't fit in, but medium-sized bolt cutters or a crowbar most likely will.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWith the hook and loop extension opened, the depth of the pouch is about 50 cm \/ 20\"\u003c\/li\u003e\n\u003cli\u003eWith the extension pushed up into the pocket, the depth is about 32 cm \/ 13\"\u003c\/li\u003e\n\u003cli\u003eNot really suitable for storing a hydration bladder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere's no separate attachment method for the bolt cutters etc., but with a little DIY spirit and imagination, you can create a suitable fastening for your own particular tool. At the top of the pocket, there are both plastic D-rings and 25 mm webbing loops for custom attachments.\u003c\/p\u003e\n\u003ch3\u003eOther Features\u003c\/h3\u003e\n\u003cp\u003eOn the sides of the back panel, there are elastic compression cords with locks. You can keep these as they are set or thread the straps through the loops on the back panel according to your preference. Near the bottom and top of the outer pouch, there are also compression straps with SR buckles. These can also be moved or removed if desired.\u003c\/p\u003e\n\u003cp\u003eIn addition to attaching it to a plate carrier, you can directly attach shoulder straps to the Assaulter Back Panel if you need to carry it like a backpack. With D-rings and other loops, you can also attach this back panel to a plate carrier in other ways, but we recommend direct MOLLE\/PALS attachment.\u003c\/p\u003e\n\u003ch2\u003eMade in the EU\u003c\/h2\u003e\n\u003cp\u003eThe manufacturer is the Finnish company CPE. The first batch of Assaulter Back Panels is made in Finland, but the company also has other factories within the EU.\u003c\/p\u003e","brand":"Varusteleka","offers":[{"title":"M05 Woodland Camo","offer_id":51826286821715,"sku":"77562","price":42400.0,"currency_code":"JPY","in_stock":false},{"title":"MultiCam","offer_id":51826286854483,"sku":"77563","price":42400.0,"currency_code":"JPY","in_stock":true},{"title":"Ranger Green","offer_id":51826286887251,"sku":"77564","price":42400.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0962\/1952\/9555\/files\/varusteleka-assaulter-back-panel-0686296a7f3aec.jpg?v=1781161728","url":"https:\/\/varustilika.com\/en-jp\/products\/varusteleka-assaulter-back-panel","provider":"Varusteleka","version":"1.0","type":"link"}